Create A New User Waypoint Defined By A Radial & Distance From Another Waypoint - Garmin Beechcraft 200 Series Cockpit Reference Manual

Or:
a) Turn the small FMS Knob to the left. Initially, a flight plan waypoint list
is displayed.
b) Turn the small FMS Knob to the right to display the 'RECENT'
waypoints.
c) Turn the large FMS Knob to select the desired waypoint.
d) Press the ENT Key.
Or:
a) Turn the small FMS Knob to the left. Initially, a flight plan waypoint list
is displayed.
b) Turn the small FMS Knob to the right to display the 'USER' waypoints.
c) Turn the large FMS Knob to select the desired waypoint.
d) Press the ENT Key.
11) Press the ENT Key. The cursor is displayed in the 'RAD' (radial) field. Enter
the desired radial from the reference waypoint.
12) Press the ENT Key.
13) Repeat step 10 to enter the next waypoint name.
14) Press the ENT Key. The cursor is displayed in the 'RAD' (radial) field for the
second waypoint. Enter the desired radial from the reference waypoint.
15) Press the ENT Key.
16) Press the FMS Knob to remove the flashing cursor.
Create a neW user Waypoint deFined By a radial & distanCe From
another Waypoint
1) Turn the large FMS Knob on the MFD Control Unit to select the 'WPT' page
group.
2) Turn the small FMS Knob to select the User WPT Information Page.
3) Press the NEW Softkey. A waypoint is created at the current aircraft
position.
4) Enter the desired waypoint name.
5) Press the ENT Key.
190-00929-00 Rev. A Garmin G1000 Cockpit Reference Guide for the Beechcraft 200/B200 Series
Flight planning
21