Panning (Pan); Range; Create A New User Waypoint - Garmin CNX 80 Pilot's Manual

The Panning feature of the Map mode allows you to check out the area near your present position. You can
activate the Panning feature by pressing the PAN key or by pressing the CRSR button on the Small knob
when in Map mode.
The crosshair cursor (+) starts at your present position when you start the Pan function. The crosshair cursor
remains in the center of the map display. Move the map around the crosshair by turning the Large (pans left
and right of pan track) and Small (pans forward and back of pan track) knobs. A green line will be drawn
between your present position and the crosshair cursor position. The range and bearing to the crosshair cursor
position from your present position and the Lat/Lon of the crosshair position is shown at the bottom of the
map display.

Range

Press the Range key to highlight the Range menu item. When Range is selected, turning the Small knob will
change the map range to zoom in or out at the crosshair position.

Create a New User waypoint

User waypoints allow you to create unique waypoints not already present in the database.
1. While in the Pan function, press MRK.
2. Press Menu/Enter to save the displayed user name.
or
3. Create a name of your choice and add other information as desired using the Small knob to change
characters and the Large knob to move the cursor. Press CLR to delete a highlighted character. Then,
press Menu/Enter to save the information.

Panning (PAN)

Basic Operation
Panning
Map Mode Panning Function
Press MRK to create a User waypoint with the
Panning function
33