Pan Mode; Create A New User Waypoint - Garmin 480 Quick Reference

MAP NAV INFO (MAP) / PAN MODE (PAN)
Setting Nav Info in Map Mode
You can customize the Nav information displayed on the left side of the display
for Map Mode pages 2, 3, and 4. You can select these options as described below.
1. Press MAP to reach Map mode.
2. Turn the Large knob to select pages 2-4. You can't change the Nav
information options for page 1.
3. Press the Menu/Enter key.
4. Press the More selection key
until the Nav Data selection is
available.
5. Press the Nav Data selection
key.
6. Press the Sel Data selection key
to activate selection of options of
Nav Data information.
7. Turn the Large knob to highlight the desired Nav Data item. Turn the
Small knob to change the displayed option.
8. Press Menu/Enter when you have completed your selections.
9. If desired, turn the Large knob to another Map Mode page and
customize that page.

Pan Mode

Activate the Panning feature by pressing the
PAN key or the CRSR button on the Small
knob when in Map mode.
The cross hair cursor (+) starts at your pres-
ent position when starting the Pan mode.
Turning the Large knob pans left/right of pan
track. Turn the Small knob to pan forward
and back of pan track. A green line is drawn
between your present position and the cross
hair position. Range and bearing to the cross hair position from your present position
and the Lat/Lon of the cross hair position is shown at the bottom of the map display.
Range
Press the Range key to highlight the Range menu item. When Range is selected, turn
the Small knob to change the map range to zoom in or out at the cross hair position.
MRK Press MRK to create a User Waypoint at the cursor position.

Create a New User waypoint

User waypoints allow you to create unique waypoints not already present in the
database.
1. While in the Pan function, press MRK.
2. Press Menu/Enter to save the displayed user name.
or
3. Create a name of your choice and add other information as desired using
the Small knob to change characters and the Large knob to move the
cursor. Press CLR to delete a highlighted character. Then, press Menu/
Enter to save the information.
13