Create A New User Waypoint - Garmin G1000 Reference Manual

6) Enter the departure time. Press the ENT Key when finished. Departure time
may be entered in local or UTC time, depending upon system settings.
7) Enter the fuel flow. Press the ENT Key when finished. Note that in 'AUTOMATIC'
page mode, fuel flow is provided by the system.
8) The flashing cursor moves to the fuel onboard field. Modify the fuel onboard.
Press the ENT Key when finished. In 'AUTOMATIC' mode, fuel onboard is
provided by the entry made on the Weight Planning Page.
9) The flashing cursor moves to the calibrated airspeed field. Enter a calibrated
airspeed. Press the ENT Key when finished.

CreAte A neW user WAypoint

1) Turn the large FMS Knob to select the 'WPT' page group.
2) Turn the small FMS Knob to select the User WPT Information Page.
3) Select the NEW Softkey. A waypoint is created at the current aircraft
position.
4) Enter the desired waypoint name.
5) Press the ENT Key.
6) The cursor is now in the 'REFERENCE WAYPOINTS' field. If desired, the
waypoint can be defined by a reference waypoint. Use one of the following
methods to enter the reference waypoint:
a) Turn the small FMS Knob to the left to display a list of flight plan
waypoints. This list is populated only when there is an active flight
plan.
b) Turn the large FMS Knob to select the desired waypoint.
c) Press the ENT Key.
Or:
a) Turn the small FMS Knob to the left. Initially, a flight plan waypoint list
is displayed.
b) Turn the small FMS Knob to the right to display the 'NRST' waypoints
to the aircraft's current position.
c) Turn the large FMS Knob to select the desired waypoint.
d) Press the ENT Key.
Or:
190-00600-02 Rev. A Garmin G1000 Cockpit Reference Guide for the Cessna Citation Mustang
Flight planning
21