Table of Contents
Advertisement
gps navigation
Altitudes associated with arrival and approach procedures are "auto-designated".
This means the system will automatically use the altitudes loaded with the arrival
or approach for giving vertical flight path guidance outside the FAF. Note that these
altitudes will be displayed as small light blue text.
Altitudes that have been designated for use in vertical navigation may also be made
"non-designated" by placing the cursor over the desired altitude and pressing the CLR
Key. The altitude is now displayed only as a reference. It will not be used to give flight
path vertical guidance. Other displayed altitudes may change due to re-calculations
or rendered invalid as a result of manually changing an altitude to a non-designated
altitude.
Large Text Altitude calculated by
the system estimating
the altitude of the
aircraft as it passes
over the navigation
point. This altitude
is provided as a
reference and is not
designated to be used
in determining vertical
flight path guidance.
Small Text Altitude is not
designated to be used
in determining vertical
flight path guidance.
Altitude has been
retrieved from the
navigation database
and is provided as a
reference.
16
Garmin G1000 Cockpit Reference Guide for the Beechcraft 200/B200 Series
White Text
Light Blue Text
Altitude has been
entered by the pilot.
Altitude is designated
for use in giving
vertical flight path
guidance. Altitude
does not match the
published altitude in
navigation database or
no published altitude
exists.
Altitude is designated
for use in giving vertical
flight path guidance.
Altitude has been
retrieved from the
navigation database
or has been entered by
the pilot and matches
a published altitude
in the navigation
database.
Light Blue
Subdued Text
The system cannot
use this altitude in
determining vertical
flight path guidance.
The system cannot
use this altitude in
determining vertical
flight path guidance.
190-00929-00 Rev. A
Advertisement
Table of Contents
