Activate An Approach In The Active Flight Plan; Activate A Vector To Final Approach Fix; Activate A Missed Approach In The Active Flight Plan - Garmin Beechcraft 200 Series Cockpit Reference Manual

7) Press the ENT Key. The cursor moves to the MINIMUMS field.
8) If desired, the DA/MDA for the selected approach procedure may be
entered and displayed on the PFD. Turn the small FMS Knob in the
direction of the green arrow to change the display from OFF to BARO.
9) Press the ENT Key. The cursor moves to the altitude field. Turn the small
FMS Knob to enter the published DA/MDA for the selected approach
procedure.
10) Press the ENT Key. 'LOAD? or ACTIVATE?' is now displayed with 'LOAD?'
highlighted.
11) Turn the large FMS Knob to select either 'LOAD?' or 'ACTIVATE?'.
Selecting 'LOAD?' enters the selected approach procedure into the active
flight plan, but is not currently active. Selecting 'ACTIVATE?' enters the
selected approach procedure into the active flight plan and is immediately
activated.
12) Press the ENT Key.

aCtivate an approaCh in the aCtive Flight plan

1) Press the PROC Key.
2) Turn the large FMS Knob to highlight 'ACTIVATE APPROACH'.
3) Press the ENT Key.

aCtivate a veCtor to Final approaCh Fix

1) Press the PROC Key.
2) Turn the large FMS Knob to highlight 'ACTIVATE VECTOR-TO-FINAL'.
3) Press the ENT Key.
4) The final approach course becomes the active leg.

aCtivate a missed approaCh in the aCtive Flight plan

1) Press the PROC Key.
2) Turn the large FMS Knob to highlight 'ACTIVATE MISSED APPROACH'.
3) Press the ENT Key. A confirmation window will be displayed.
4) With 'ACTIVATE' highlighted, press the ENT Key.
Or:
Press the go-around button.
190-00929-00 Rev. A Garmin G1000 Cockpit Reference Guide for the Beechcraft 200/B200 Series
procedures
33