Important Information; Package; Important Information • Package - AERMEC Omnia HL 11 N Use And Installation Manual

IMPORTANT INFORMATION

IMPORTANT: OMNIA fan coils
are designed for indoor use.
IMPORTANT: the fan coil is con-
nected to power supply and
water circuit. Operations per-
formed by persons without the
required technical skills can lead
to personal injury to the operator
or damage to the unit and sur-
rounding objects.
I M P O R TA N T: c o m p o n e n t s
sensitive to static electricity
may be destroyed by discharges
notably lower than those at the
human perception threshold.
These discharges form when you
touch a component or electric
contact of a unit, without first
discharging accumulated static
electricity from your body. The
damage caused to the unit by an
overvoltage is not immediately
evident, it only appears after a
certain period of operation.
STATIC ELECTRICITY
ACCUMULATION
Any person not connected in a con-
ductive manner with the electronic
potential of his surrounding envi-
ronment can accumulate electro-
static charges.
STANDARD PROTECTION AGAINST
ELECTROSTATIC CHARGES
Earthing quality
When working with units sensitive
to electrostatic electricity, ensure
that people, workplaces and unit
casings are correctly earthed. This
will prevent the formation of elec-
trostatic charges.
Avoid direct contact
Only touch the element exposed to
electrostatic risk when absolutely
essential (e.g.: for maintenance).
Touch the element without coming
into contact with either the contact
pins or the wire guides. If you fol-
low this rule, the energy of the

PACKAGE

The fan coils are shipped in stand-
ard package which consists of
22
IHLNLJ 2302 - C6887213_01
electrostatic charges cannot
reach or damage the sensitive
parts.
Before taking measurements on the
unit, it is necessary to discharge
all electrostatic charges from your
body. To do this, just touch an
earthed metal object. Only use
earthed measuring instruments.
POWER THE FAN COIL ONLY WITH
230V, SINGLE-PHASE VOLTAGE
Any other type of power supply
could permanently damage the fan
coil.
DO NOT USE THE FAN COIL
IMPROPERLY
Do not use the fan coil for animal
husbandry applications (e.g. incu-
bation).
AIR THE ROOM
Periodically air the room in which the
fan coil has been installed. This is
particularly important if the room is
occupied by many people, or if gas
appliances or sources of odours are
present.
A D J U S T T E M P E R AT U R E A D E -
QUATELY
The room temperature should be
adjusted in order to provide maxi-
mum comfort to the people in the
room, especially if they are elderly,
children or sick people; avoid dif-
ferences over 7°C between the out-
door temperature and the tempera-
ture inside the room in summer.
In summer, a temperature that is too
low causes higher electrical con-
sumption.
CORRECTLY ADJUST THE AIR JET
Air coming out from the fan coil must
not reach people directly; in fact,
even if the air is warmer than the
room temperature, it could cause a
cold sensation and result in discom-
fort.
DURING OPERATION
Always leave the filter fitted on
expanded polystyrene foam and
cardboard shells.
the fan coil during operation (oth-
erwise dust in the air could soil the
coil surface area).
WHAT IS NORMAL
In the cooling operation, water
vapour may be present in the air
delivery of the fan coil.
In the heating operation, a slight hiss
might be heard close to thefan coil.
Sometimes the fan coil might give
off unpleasant smells due to the
accumulation of substances pre-
sent in the air of the room (clean the
filter more often, especially if the
room is not ventilated regularly).
While the unit is functioning, there
could be noises and creaks inside
the device due to the various ther-
mal expansions of the elements
(plastic and metal), but this does
not indicate any malfunction and
does not damage the unit unless
the maximum input water tem-
perature is exceeded.
MALFUNCTIONING
In the event of a malfunction, cut
off power supply to the unit, then
restore the power and start the
unit again. If the problem occurs
again, call the local After-Sales
Service immediately.
DO NOT TUG THE ELECTRIC
CABLE
It is very dangerous to pull, tread
on or crush the electric power
cable, or fix it with nails or drawing
pins.
A damaged power cable can
cause short circuits and injure
people.
DO NOT OBSTRUCT THE AIR OUT-
LETS BY PLACING OBJECTS INTO
THEM
Do not put anything in the air outlet
slots.
This could injure people and damage
the fan.