Subscribe to Our Youtube Channel
Related Manuals for AERMEC Omnia Radiant Series
Summary of Contents for AERMEC Omnia Radiant Series
- Page 1 FAN COIL UNITS Omnia • VERTICAL INSTALLATION • VENTILATED HEATING UL_R-UL_RI • • COOLING / DEHUMIDIFICATION • IUL_R-UL_RIPI. 6976420_03 1503...
- Page 2 MODEL WITH ACCESSORIES : It is not allowed to use the unit equipped with accessories not supplied by Aermec. MODÈLE PLUS ACCESSOIRES : Il est interdit de faire fonctionner l appareil avec des accessoires qui ne sont pas fournis de Aermec.
- Page 3 MODEL WITH ACCESSORIES : It is not allowed to use the unit equipped with accessories not supplied by Aermec. MODÈLE PLUS ACCESSOIRES : Il est interdit de faire fonctionner l appareil avec des accessoires qui ne sont pas fournis de Aermec.
- Page 4 Dimensions ..................23 3.2. Minimum clearance spaces ............. 23 .............24 .................25 ..............25 5.2. Condensate drain ................25 ..............26 ..........27 ................. 27 ................28 ....28 Maintenance ................29 ..............29 8.2. Special maintenance ............... 29 ...............29 Aermec cod. 6976420_03 15.03...
-
Page 5: During Operation
If measurements have to be taken from the unit During heating it might be possible to hear a slight it is important to electrically discharge the body hiss around the fan coil unit. Sometimes the fan Aermec cod. 6976420_03 15.03... -
Page 6: Operating Limits
SAFETY SYMBOLS are excluded by the Company. Any uses not expressly tion. indicated in this manual are not permitted. Aermec assumes no responsibility for damage caused by failure to observe these instructions. Danger Before commencing any works it is necessary 1.1. -
Page 7: Ambiente Di Funzionamento
DIMENSIONS AND MINIMUM CLEARANCE SPACES 3.1. DIMENSIONS Model OMNIA UL_R - UL_RI Height (mm) Width (mm) 1200 Depth (mm) Foot height (Accessory “ZU”) (mm) Weight (kg) 3.2. MINIMUM CLEARANCE SPACES Model OMNIA UL_R - UL_RI (mm) (mm) CLEARANCE (mm) (mm) Aermec cod. 6976420_03 15.03... -
Page 8: Installation
(see chapter ELECTRICAL CONNECTIONS “DIP-SWITCH SETTINGS”). Mount the casing. unit. sealed packaging, to be opened only at the The support structure must be com- (not supplied) suitable for the wall, to (accessory) Aermec cod. 6976420_03 15.03... - Page 9 Condensate drain mended that a trap is used to prevent odours rising into the space. Drain pan diaphragm for dis- Leak test the condensate drain. charge of the condensate drain Aermec cod. 6976420_03 15.03...
-
Page 10: Electrical Connections
H5VV-F. All cables must be protected by a conduit or updates so it is mandatory to refer to those on the unit. grams supplied with the unit and shown in Aermec cod. 6976420_03 15.03... - Page 11 Dip 7 (Default OFF) Dead-band: Diverting solenoid valve Dead-band 5K Dip 6 Dip 5 Fan motor Dead-band 2K 0.5K Water sensor Dip 8 (Default OFF) Not used 0.8K TTL serial network 1.2K Blue 1.5K Black Brown Aermec cod. 6976420_03 15.03...
- Page 12 For this reason it is recommended to replace the filter after two years. Replacement filters are available from Aermec service centres. • Maintenance Clean frequently. Remove any accumulated dust with a vacuum cleaner.
-
Page 13: Routine Maintenance
The special maintenance must only be carried may be done more frequently. Cleaning is of Operations: out by the Aermec service centre technicians or the coil, the demountable fan housing, the Externally clean every week with a damp personnel with the technical and professional ex- blades of the fan, the drain pan and all the cloth and neutral soap;...
Need help?
Do you have a question about the Omnia Radiant Series and is the answer not in the manual?
Questions and answers