Restoring From Gaia Clish - Check Point QUANTUM SANDBLAST TE2000XN-28VM Getting Started Manual

8. When the message
seconds to hit any key to activate the
9. From the Boot menu, select the relevant
10. Press Enter.
The appliance initializes and status messages are shown in the terminal emulation program.
Restoring from
To restore the appliance from
1. Connect to the command line on the appliance.
2. Log in to Gaia Clish.
3. Run:
set fcd revert <image_name>
Example:
MyAppliance> set fcd revert Gaia_R81
Warning! This command will erase all the current configuration on this appliance and will revert it to
the selected image.
Are you sure you want to continue such action? (Yes/No) [No]
y
reverting to factory defaults Gaia_R81
MyAppliance>
INIT: Sending processes the TERM signal
"Press any key to see the boot
Boot menu.
Reset to factory defaults
Gaia Clish
Gaia Clish:
Sandblast TE2000XN-28VM/56VM Appliances Getting Started Guide | 41
Restoring Factory Defaults
menu" is shown, you have approximately four
image.