Table of Contents
Advertisement
Dual Redundant BIOS
To ensure resilience in the event of a BIOS failure, appliances are equipped with dual redundant BIOS
images.
If an appliance encounters a BIOS failure, it will boot up from a recovery, read-only BIOS image that enables
full functionality of the appliance.
These notifications are shown in the event of a BIOS failure:
The appliance's Alert LED on the front panel will blink red.
n
The
Gaia Portal Maintenance
n
its status is Off.
Example:
An SNMP trap message is sent (if the biosFailure trap was configured in the
n
Clish).
Example:
To recover from a BIOS failure, see
functional until the BIOS recovery is completed. Note that it can take a few minutes for it to boot in BIOS
recovery mode.
>
Hardware Health
page shows that the BIOS sensor is
sk108517
or contact
Check Point Support
Sandblast TE2000XN-28VM/56VM Appliances Getting Started Guide | 37
TE2000XN Appliances Hardware
Invalid
Gaia Portal
. The appliance is fully
and
or
Gaia
Advertisement
Table of Contents
Need help?
Do you have a question about the QUANTUM SANDBLAST TE2000XN-28VM and is the answer not in the manual?