Installing The Power Cable Restraint - Check Point QUANTUM SANDBLAST TE2000XN-28VM Getting Started Manual

Installing the Power Cable Restraint

You can use the power cable restraint to prevent accidental removal of the power cable.
Item Description
1 Restraint anchor
2 Cable loop
3 Restraint strip tab
4 Restraint strip
Item Description
1 Restraint strip slot
2 Power supply inlet
To install the power cable restraint:
1. If a power cable is connected to the power supply inlet, disconnect it.
2. Find the restraint strip slot on top of the power supply inlet.
3. Make sure that the cable loop on the restraint faces the power supply inlet.
4. Insert the restraint strip anchor into the slot until it snaps and locks.
Sandblast TE2000XN-28VM/56VM Appliances Getting Started Guide | 35
TE2000XN Appliances Hardware