Psu Configuration And Monitoring - Check Point QUANTUM SANDBLAST TE2000XN-28VM Getting Started Manual

PSU Configuration and Monitoring

The supported PSU configurations for the appliance's PSU types:
PSU Type Number of PSUs
AC PSU 2 AC PSUs
DC PSU 2 DC PSUs
Important - All PSUs on an appliance must be of the same type, either all AC or all DC.
When a PSU is functioning correctly: the PSU LED is green, the Alert LED is not blinking due to a PSU issue
(might still be blinking due to other errors), and there is no SNMP alarm.
When a PSU is not functioning correctly: the PSU LED is amber, the Alert LED is blinking due to a PSU
issue, and an SNMP alarm is sent.
To monitor the PSUs through the CLI:
1. Connect to the command line on the appliance.
2. Log in to Gaia Clish.
3. Run:
show sysenv ps
Sample output:
Where:
Column
Name
Value
Unit
Type
Description
Power Supply #1 - The PSU in the leftmost slot.
Power Supply #2 - The PSU in the rightmost slot.
Up - The PSU slot containing a PSU is up.
Down - The PSU slot contains a PSU and it is not connected to a power source.
Empty - There is nothing in the PSU slot.
Up/Down - The type of measure unit used for PSUs is either Up or Down.
Power - The type of sensor is power supply.
Sandblast TE2000XN-28VM/56VM Appliances Getting Started Guide | 38
TE2000XN Appliances Hardware