Download Print this page

ADTRAN NETVANTA 1544 Series Quick Start Manual page 4

Gigabit ethernet switch
Hide thumbs Also See for NETVANTA 1544 Series:

Advertisement

C
Y
ONFIGURE
OUR
The applications you will need to configure vary by product and by network. Review the list of
defaults for your unit before deciding what applications to configure. The following are some
common applications that should be configured on startup. These are all available online on
ADTRAN's Knowledge
Configuring Layer 3 Switching in AOS
(article 3070)
Configuring Hardware ACLs in AOS
(article 3088)
Configuring DoS Protection in AOS
(article 3113)
Configuring Ethernet Switch QoS and CoS
in AOS (article 1489)
Configuring DHCP Server in AOS
(article 2149)
Important: For additional details on product features, specifications,
installation, and safety, refer to the
Installation Guide
http://kb.adtran.com.
Feature
IP Address
User Name
Password
HTTP Server
Event History
IP Routing
R
F
ESTORING
ACTORY
On units that have a console port, you cannot restore the factory defaults, but must rather erase
the device's configuration and then reconfigure the unit to operate correctly for your network. To
erase the unit's current configuration, follow these steps:
1.
Access the unit's CLI and enter enable at the > prompt.
2.
Enter erase startup-config at the # prompt. The device will have a blank configuration upon
reboot.
3.
Enter reload at the # prompt to begin restarting the device. When prompted to save
configuration, enter no. When prompted to reboot, enter yes.
4.
Upon reboot you will have to reconfigure the unit using the CONSOLE port. Follow the steps
outlined here or in the technical note,
Knowledge Base article 1788) at http://kb.adtran.com.
4
A
PPLICATION
Base.
(ADTRAN's Knowledge Base article 3405) at
D
EFAULTS
Accessing the Web Interface in AOS
Copyright © 2011 ADTRAN, Inc. All Rights Reserved.
Configuring a Port Scheduler in AOS
(article 3054)
Configuring Port Mirroring in AOS
(article 2180)
Enabling Persistent Debug Logging in AOS
(article 2623)
Understanding PoE and Power Management in AOS
(article 2522)
NetVanta 1500 Series Hardware
Default Value
10.10.10.1
admin
password
Enabled
Enabled
On
(ADTRAN's

Advertisement

loading

This manual is also suitable for:

1702544g11702545g11700546g1 1201700546g1 240