Advertisement
Quick Links
Installing the NetVanta 1524 Series Switch
Quick Start Guide
1 G
S
ETTING
TARTED
Two configuration methods are available for your NetVanta Switch:
•
Web-Based GUI (discussed in this section)
•
AOS CLI (discussed on page 2)
You may access the web-based GUI from any web browser on your network by
following these steps:
1.
Connect the switch to your PC using the ETH 0/0 port on the back of the
unit.
2.
Set your PC to obtain an IP address automatically (or if using a fixed IP
address, set your PC to 10.10.20.2).
3.
Enter the unit's IP address in your browser address line (see example,
below). The default IP address is 10.10.20.1.
4.
You will then be prompted for the username and password (the default
settings are admin and password).
Quick Start Guide, 61200560L1-13A, November 2004
A
GUI
CCESSING THE
—
Technical Support 1-888-4ADTRAN (1-888-423-8726)
For more detailed documentation, visit us online at
4.
The initial GUI screen appears.
www.adtran.com
P/N 1200560L1
© 2004 ADTRAN, All Rights Reserved
Advertisement
Related Manuals for ADTRAN NetVanta 1524
Summary of Contents for ADTRAN NetVanta 1524
- Page 1 Installing the NetVanta 1524 Series Switch Quick Start Guide ETTING TARTED CCESSING THE — Two configuration methods are available for your NetVanta Switch: • Web-Based GUI (discussed in this section) • AOS CLI (discussed on page 2) You may access the web-based GUI from any web browser on your network by...
- Page 2 (CLI) may be necessary for more advanced configurations. Access the AOS CLI via the CONSOLE port or a Telnet session. To establish a connection to the NetVanta 1524 Switch CONSOLE port, you need the following items: •...