P N P/Pci Configuration - Lanner electronics EM-535 Series Manual

AWARD BIOS SETUP
3.7 P P/PCI C
N ONFIGURATION
Both the ISA and PCI buses on the CPU card use system IRQs & DMAs. You must set up the IRQ
and DMA assignments correctly through the PnP/PCI Configuration Setup utility, otherwise the SBC will
not work properly.
When you select the "PnP /PCI CONFIGURATION" on the main program, the screen display will
appears as:
PnP/PCI Configuration Setup Screen
PNP OS Installed
Resources Controlled By
Reset Configuration Data
IRQ-3 Assigned to
IRQ-4 Assigned to
IRQ-5 Assigned to
IRQ-7 Assigned to
IRQ-9 assigned to
IRQ-10 assigned to
IRQ-11 assigned to
IRQ-12 assigned to
IRQ-14 assigned to
IRQ-15 assigned to
DMA-0 assigned to
DMA-1 assigned to
DMA-3 assigned to
DMA-5 assigned to
DMA-6 assigned to
DMA-7 assigned to
PNP OS Installed : Select Yes if the system operating environment is Plug-and-Play aware .
Resources Controlled By : The defaults setting is "Auto" which will control all IRQs and DMAs
automatically. The other option is "Manual" which allows you to control IRQs and DMAs individually.
Reset Configuration Data : The default setting is "Disabled". When set to "Enabled", the content of
the ESCD block in flash BIOS will be cleared.
IRQ assigned to and DMA assigned to : If there is a legacy ISA device which uses an IRQ or a DMA,
ROM PCI / ISA BIOS (2A434L7H)
PNP/PCI CONFIGURATION
AWARD SOFTWARE, INC.
: No
: Manual
: Disabled
: Legacy ISA
: Legacy ISA
: PCI/ISA PnP
: Legacy ISA
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
EM-535 / 42
PCI IRQ Activated By
Used MEM base addr
áâàß
ESC : Quit
F1 : Help PU /PD/+/-
F5 : Old Values ( Shift ) F2
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
: Level
: N/A
:
Select Item
: Modify
: Color