Lanner electronics EM-535 Series Manual page 47

: Allows you to customize all power saving timer features.
User Define
Optimize : This is the recommended setting for general use.
: This is for test/demonstration purpose.
Test/Demo
Disable : Disable the power management features.
Doze Mode: Options are from "1 Min" to "1 Hour" and "Disable".
turbo to slow and the video signal will be suspended, if no Power Management events occur for a
specified length of time.
Standby Mode : Options are from "1 Min" to "1 Hour" and "Disable". The system speed will change
from turbo to slow and the video signal will be suspended, if no Power Management events occur for a
specified length of time.
HDD Power Down : Options are from "1 Min." to "15 Min." and "Disable".
down if it is not accessed within a specified length of time.
MODEM Use IRQ : This field name the interrupt request (IRQ) line assigned to the modem (if any) on
your system. Activity of the selected IRQ always awakens the system.
Throttle Duty Cycle: When the system enters Doze mode, the CPU clock runs only part of the time.
You may select the percent of time that the clock runs.
IRQ1~IRQ15 : These fields are designed for selected peripherals, e.g. Keyboard, COM2, COM1, LPT2,
Floppy Drive, etc... You can set to either "ON" or "OFF" fields to activate or deactivate these
peripherals.
After you have made your selection in the POWER MANAGEMENT SETUP, press the <ESC> key to
go back to the main program screen.
Full power function will return when a Wake-Up event is detected.
Full power function will return when a Wake-Up event is detected.
EM-535 / 41
AWARD BIOS SETUP
The system speed will change from
The IDE hard drive will spin