Load Bios Defaults; Load Setup Defaults - Lanner electronics EM-535 Series Manual

AWARD BIOS SETUP
3.8 L BIOS D
OAD
The BIOS defaults have been set by the manufacturer which represent settings provided with the
minimum requirements for your system to operate.
default values permanently recorded in the BIOS ROM.
high performance features.
The Standard CMOS Setup screen is not affected.
and press <Enter>.
<Y> key and the <Enter>.
STANDARD CMOS SETUP
BIOS FEATURES SETUP
CHIPSET FEATURES SETUP
POWER MANAGEMENT SETUP
PNP / PCI CONFIGURATION

LOAD BIOS DEFAULTS

LOAD SETUP DEFAULTS

ESC : Quit
F10 : Save & Exit Setup
3.9 L S D
OAD ETUP
"LOAD SETUP DEFAULTS" loads the optimal settings which are stored in BIOS ROM.
loaded affect only the BIOS Features Setup, Chipset Features Setup, Power Management Setup,
PnP/PCI configuration setup and Integrated Peripherals Setup. There is no effect on the Standard
CMOS Setup. To use this feature, highlight the entry on the main screen and press <Enter>. A line will
appear on the screen asking if you want to load the Setup default values.
press the <Enter> key if you want to load the Setup defaults. Press <N> if you do not want to
proceed.
EFAULTS
A line will appear asking if you want to load the BIOS default values. Press the
The default settings will load.
ROM PCI / ISA BIOS (2A434L7H)
CMOS SETUP UTILITY
AWARD SOFTWARE, INC.
Load BIOS Default (Y/N)? Y
Time, Date, Hard Disk Type....
EFAULTS
" Load BIOS Defaults " loads the troubleshooting
These settings are non-optimal and turn off all
To use this feature, highlight it on the main screen
Press <N> if you do not want to proceed.
INTEGRATED PERIPHERALS
SUPERVISOR PASSWORD
USER PASSWORD
IDE HDD AUTO DETECTION
SAVE & EXIT SET\\UP
EXIT WITHOUT SAVING
á â à ß
: Select Item
(Shift) F2 : Change Color
EM-535 / 44
The defaults
Press the <Y> key and then