Possible Malfunctions - Bartscher 700FX-GST110 Manual

8

Possible Malfunctions

Mögliche
The table below contains descriptions of possible causes and solutions to
malfunctions or errors during operation of the appliance. When malfunction cannot
be removed, contact the technical service.
In such a case, provide article number, model name and serial number. These data
may be found in the rating plate.
Problem
Ignition burner does
not switch on
EN
Ignition burner does
not switch on or goes
out when the knob or
piezoelectric igniter
is released
32 / 34
Possible Cause
Insufficient gas supply
pressure
Clogged line or nozzles
Spark plug is incorrectly
connected or damaged
Igniter or spark plug line is
damaged
Damaged knob
Thermo-element is
incorrectly connected to
the knob
Thermo-element is
damaged or insufficiently
heated up by the ignition
burner
Damaged knob
Knob has not been
pressed sufficiently long
Damaged gas fittings
Possible Malfunctions
Solution
Check gas supply
Contact the service company
Connect spark plug or
replace it
Contact the service company
Contact the service company
Contact the service company
Repeat the ignition process
Contact the service company
Keep the knob pressed for
approx. 20 seconds
Contact the service company
2837861