Table of Contents
Advertisement
Installation Instructions
Unpacking / Positioning
•
Unpack the appliance, remove all external and internal packaging elements and
shipment safeguards.
CAUTION!
Choking hazard!
Prevent children from accessing package materials, for instance: plastic
bags and EPS.
•
If the appliance is covered with a protective film, remove it. Remove the film
slowly, so no glue residues are left. Remove any glue residues with the use of a
suitable solvent.
•
Be careful not to damage the rating plate and warning labels fixed on the
appliance.
•
Never place the appliance in humid or wet environment.
•
Place the appliance in a way making the connections easily accessible, so that
they may be quickly disconnected if such a need arises.
•
The appliance should be placed on surfaces that are:
– even, with sufficient bearing capacity, resistant to water, dry and resistant
to high temperatures;
– sufficiently large, and thus enabling usage of the appliance with no
problems;
– easily accessible;
– well ventilated.
•
Screw 4 feet in.
– To level the appliance, you may adjust the height of feet.
IMPORTANT!
Never use the appliance without feet.
•
Never place the appliance directly next to walls, furniture, or other objects made
of flammable materials. Maintain minimum clearance of 200 mm between side
and rear walls and the said objects and walls. Maintain clearance of at least 600
mm between the appliance's surface and horizontal surfaces over the appliance.
•
If keeping the minimum clearance is not possible, walls should be isolated with
non-combustible, thermo-insulation materials (e.g., films made of heat resistant
materials, which may sustain temperature of at least 65°C). Follow fire
protection regulations in force.
2837861
EN
21 / 34
Advertisement
Table of Contents
