Replace The Battery - Cochlear Baha 5 SuperPower User Manual

Replace the battery

Remove the battery
Twist the battery module to remove it from the
processing unit.
Attach the battery
Align the battery module to the processor socket
to fit the parts together. Twist the battery module
as shown to attach the parts. The processor will
turn on automatically.
Lock/Unlock the battery (tamper-proof)
See figure 9
To increase tamper resistance, push the lock to
1
the far left with your battery cover locking tool
to lock the battery module.
2 Push the lock to the far right to unlock the
battery module.
Main power light
Steady green
Does not light up
Battery socket light
Steady orange
Steady green
Flashing orange
Does not light up
See figure 2
See figure 2
What it means
Battery charger power is on.
Power adaptor is not plugged in or mains power is not available (or, if
switched, is not turned on).
What it means
Battery module is charging.
Battery module is fully charged.
There is a problem with the battery module. Try a different socket.
Replace the rechargeable battery module.
Battery module is not properly placed, is over-discharged or there is
no power. Check the battery charger is powered on and reconnect the
battery charger. If it still does not light up, replace the battery module.
Charge battery modules
Angle and fit the rechargeable battery module
1
into a socket on the Cochlear Nucleus®
Battery Charger.
2 Twist clockwise to connect.
Connect the battery charger to the power
3
adaptor and plug into mains power.
English
10
See figure
9