Application <Counting; Application-Specific Settings - KERN CKE 6K0.02 Operating Instructions Manual

9 Application <Counting>

9.1 Application-specific settings

Call up menu:
Press the TARE key and hold it until < apcmen > is displayed.

The display changes to < coumod > followed by < ref >.


Navigation in menu see chap. 10.1
Overview:
Level 1
Ref
Reference quantity
Ptare
PRE-TARE
unit
Units
check
Check weighing
27
Level 2 Level 3
5
Reference quantity 5
10
Reference quantity 10
20
Reference quantity 20
50
Reference quantity 50
free
Optional, numeric input, see chap. 3.2.2.
input
Input of item weight, numerical input, see chap. 3.2.2
Take over the placed weight as PRE-TARE value, see chap.
actuAl
0
manuAl
Numerical input of the tare weight, see chap. 9.5.2.
CLEAR
Delete PRE-TARE value
available
This function defines in which weighing unit the result will be
weighing units,
displayed, see chap. 9.6.1
see chap. 1
FFA Multiplication factor, see chap. 9.6.2
target value
Target counting
errupp
errlow
reset
limits limupp
Check counting
limlow
reset
Description / Chapter
see chap. 9.3.
see chap. 9.4.
TCKE-A/-B-BA-e-2333