Automatic Data Output < Auto; Continuous Data Output < Cont - KERN CKE 6K0.02 Operating Instructions Manual

11.2.3 Automatic data output < auto>
Data output happens automatically without having to press the PRINT-key as soon
as the corresponding output condition has been met, dependent on the setting in the
menu.
Enable function and set the output condition:
 In Setup menu invoke the menu setting < print >  < prmode
trig > and confirm with ➔ button.
For an automatic data output select the menu setting < auto > using the

navigation keys  and confirm by the ➔ button.
Use the navigation keys  to select the setting < on > and confirm on ➔

button. < zRange> is displayed.
 Acknowledge by ➔-button and set the required output condition with the
navigation keys .
 Acknowledge by ➔-button.
To exit the menu press the navigation key  repeatedly.

Place goods to be weighed on balance:
 If required, place empty container on scale and tare.
 Place weighed goods and wait until the stability display (
The weighing value is issued automatically.
11.2.4 Continuous data output < cont >
Enable function and set the output interval:
In Setup menu invoke the menu setting < print >  < prmode

trig > and confirm with ➔ button.
For a continuous data output select the menu setting < cont> using the

navigation keys  and confirm on ➔ button.
Use the navigation keys  to select the setting < on> and confirm on ➔

button.
< speed> is displayed.

 Acknowledge with the ➔-button and set the required time interval with the
navigation keys  (numeric input see chap. 3.2.2)

<Zero> & <Stable> set the required output condition.
 To exit the menu press the navigation key  repeatedly.
Place goods to be weighed on balance
 If required, place empty container on scale and tare.
 Place goods to be weighed.
 The weighing values are issued according to the defined interval.
TCKE-A/-B-BA-e-2333
 <
>
) appears.
 <
>
52