Sd Section Operations; Switching In The Sd Section - Edirol V-440HD Owner's Manual

SD Section Operations

You can switch and compose SD video in the SD section.

Switching in the SD Section

You can switch the SD video input using the V-440HD's video fader
(SD) along with the C-BUS channel buttons (SD) and B-BUS channel
buttons (SD).
A-BUS Channel Button
(SD)
B-BUS Channel Button
(SD)
Switching Buses with the Video Fader (SD)
When the video fader (SD) is tilted towards the A-BUS, the video on
the A-BUS is output. Similarly, when the video fader (SD) is tilted
towards the B-BUS, the video on the B-BUS is output.
* For instructions on selecting the video on the A-BUS and B-BUS,
refer to Selecting the Bus Input (p. 35).
To confirm (preview) the video in the bus opposite that to
which the video fader (SD) is tilted, connect a television monitor
to the "SD PREVIEW OUT connector" (p. 19).
* In addition to the preview video, you can also output from the SD
PREVIEW OUT connector the same video that is output from SD
PGM OUT. Set this from the menu by selecting "13. SD Preview Out
Select" under "13. System."
34
Switching Buses with the AUTO Button (SD)
The A-BUS and B-BUS switch automatically when the AUTO Button
(SD) is pressed. The time used for switching between the A-BUS and
C-BUS is set by rotating the TIME knob (SD). The time set with the
TIME knob (SD) is indicated in the TRANSITION TIME display
(SD). The time can be set to any value from 0 to 120 frames.
Video Fader
(SD)
Selecting the Effect Applied When Switching Buses (SD)
The effect applied when switching the video is selected by pressing
the TRANSITION buttons (SD).
Button
CUT
MIX
WIPE PATTERN 1-6
TIME Knob (SD)
AUTO Button (SD)
Function Description
Cut The video switches
when the video
fader (SD) reaches
the halfway point.
Dissolve The video is mixed
as it gradually
switches according
to the angle of the
video fader (SD).
Wipe switching The video switches
with a wipe effect,
with the wipe cor-
responding to the
angle of the video
fader (SD).
* This cannot be select-
ed while the P in P ef-
fect (p. 35) is in use. If
the P in P effect is in
use when WIPE PAT-
TERN 1-6 is selected,
MIX is selected auto-
matically.