Installing OMS and Serial MIDI Driver on Macintosh
3
The following dialog appears. If you have Opcode Studio 4 or
5, or the X Series MIDI Interface, click [Yes]. Otherwise, click
[No] to proceed.
fig.60
4
When you have finished the installation a dialog appears.
Click [Restart] to restart your Macintosh.
fig.70_70
Installing the SK-500 Driver
1
On the SK-500 CD-ROM, open "English" - "OMS" and double-
click on the "SK-500 OMS Serial Installer-E" icon in the folder.
fig.71
54
Although an error dialog
may appear when the
installation of OMS is
finished, OMS is installed
without any problems, so
click "OK" in the dialog
and select "Quit" from the
OMS Installer "File" menu.
Following this, restart the
Macintosh.