Setting The Midi Output Destination - Roland Sound Canvas SK-500 Owner's Manual

Installing the USB MIDI Driver In Windows 98
12
Click the "SETUPINF" "OK" button and close the dialog.
* Refer to the section Setting the MIDI Output Destination which follows to make
the settings allowing you to use the SK-500 from your computer. You will not be
able to use the SK-500 without making these settings.

Setting the MIDI Output Destination

1
Open "Control Panel."
2
Double-click on "Multimedia" in "Control Panel."
fig.Multi
3
Click on the "MIDI" tab and select "Roland SK-500 PART A"
in the "MIDI output" box.
fig.12_90
* If you are unable to select "Roland SK-500 PART A," it may be that some other
problem exists. Refer to Troubleshooting (p. 84).
20