Installing The Sk-500 Driver - Roland Sound Canvas SK-500 Owner's Manual

Installing the SK-500 Driver

1
On the SK-500 CD-ROM, open "English" - "OMS" and double-
click on the "SK-500 OMS USB Installer-E" icon in the folder.
fig.41
2
Confirm that OMS has been installed where you are going to
install the SK-500 driver, then click "Install."
fig.42_70
3
If the message below appears, click "Continue" to click open
applications and proceed with the installation.
fig.43_65
4
A dialog with the message "Installation was successful. –"
appears. Click on "Restart" to restart Macintosh.
Installing OMS and USB MIDI Driver on Macintosh
Although an error dialog
may appear when the
installation of OMS is
finished, OMS is installed
without any problems, so
click "OK" in the dialog
and select "Quit" from the
OMS Installer "File" menu.
Following this, restart the
Macintosh.
47