Is the Studio Setup enabled?
If no diamond ( ) mark appears at the left end of the title section in the OMS
Studio Setup screen, it indicates that the settings are not in effect. Enable the
settings by selecting "Make Current" from the File menu.
No Sound in the OMS Test
Are the sound module settings correct?
Check the SK-500's computer switch.
Set the switch to "USB" when using a USB connection, and to "Mac" when
using a serial connection.
The SK-500 does not recover correctly from sleep
mode.
After your Macintosh has been in sleep mode, exit the software and re-start it.
* We recommend that you make Energy saving settings in the Control panel so that
your computer does not enter sleep mode.We recommend setting the sleep settings
in the Energy Saver control panel so that the computer never sleeps.
Restart the Macintosh
Restart the Macintosh, then check the settings once more.
In Other Operations
There is no sound
When no sound is output, the causes may include mistakes in connecting
devices or in driver or software settings. Furthermore, when using the SK-
500 on its own, be sure to set Local Control to ON.
Troubleshooting
103