Dell EMC PowerEdge MX7000 Field Service Manual page 57

Figure 65. Removing the input and output cage
4. Pull the input and output cage to remove it from the enclosure.
Installing the input and output module cage
Prerequisites
1. Remove the modules from Fabric A or B
2. Remove the modules from Fabric C
3. Remove the management
Steps
1. Align and push the input output module cage completely into the enclosure.
2. Use a Phillips #2 screwdriver, tighten the captive screws to secure the cage to the enclosure.
slot.
slot.
modules.
Field service information 57