Dell EMC PowerEdge MX7000 Field Service Manual page 41

Figure 41. Removing the right control panel cable
Next steps
1. Replace the right control panel
2. Replace the input output module
Installing the right control panel cable
Prerequisites
1. Remove the right control panel
Steps
1. Insert the connector end of the cable through the side wall of the chassis.
2. Slide the hooks on the cable module into the slots in the chassis inner wall.
3. Use a Phillips #2 screwdriver, secure the module with the chassis sidewall.
Figure 42. Installing the right control panel cable
ear.
cage.
ear.
Field service information 41