Toshiba RAV-SM2244DTP-TR Service Manual page 99

4-4 Install the ferrite core of motor earth lead to motor lead
[Step1]
Remove the cramp filter from motor lead.
[Step2] Only motor lead has connect to PCB(MCC1610)
Remove the motor lead from PCB(MCC1610)
[Step3]
Through the motor lead in a hole of ferrite core at twice.
[Step4]
Connect the motor lead to PCB(MCC1610).
Notice : Check the connection between motor lead and connector on PCB invariably
Red motor lead = CN705(RED) White motor lead = CN704(WHI) Black lead = CN703(BLK)
[Step5]
Fix the ferrite core to motor lead and reactor lead and white lead of power lead by using tie band.
Step1
Step2
PCB for motor
MCC1610
Step4
Step3
– 99 –
Reactor lead
Power lead
CN703(BLK)
CN704(WHI)
CN705(RED)
Step5