Toshiba RAV-SM2244DTP-TR Service Manual page 97

Photo of motor earth lead before repairing
4-2 Replace to new noise filter PCB
[Step1]
Remove the earth screw from metal plate.
[Step2]
Remove four wiring (red and white) which are connected in PCB.
Notice : These wiring have lock mechanism. So when remove the wiring, it need to push the lock which
is set side of connector.
[Step3]
Unlock the four PCB spacers and remove.
[Step4]
Replace the new noise filter PCB to PCB spacer and connect wiring and tighten screw same as step 1 to 3.
Notice : Before replace the new noise filter PCB, check the number which is described in label on PCB
Old PCB : 1117878001
1. Remove the ferrite core
2.Tie the extra length of earth
lead by tie band
Alternate new PCB: 1117878002
Step2
– 97 –
Photo of motor earth lead after repairing
Step1
Old PCB
Alternate new PCB
Step3
Step3
: 1117878001
: 1117878002