Toshiba RAV-SM2244DTP-TR Service Manual page 90

Part name
No.
1. Detachment
④ Noise filter
1) Perform 1 of ①to remove the electrical parts box cover.
P.C. board
2) Remove the connector of the below No. from the P.C .
MCC-1551
board.
CN01 : Power supply (Red wire)
CN02 : Power supply (White wire)
CN03 : Power supply (Red wire)
CN04 : Power supply (White wire)
3) Remove the screw of the earth wire.
4) Unlock the card edge spacers (4 positions) in the
electrical parts box to remove the noise filter P.C. board.
NOTE
First unlock the housing and then remove the
connectors.
2. Attachment
1) Mount the noise filter P.C. board in the electrical parts
box as before.
2) Be sure to wire in the electric parts box as before.
NOTE 1
Check if there is no missing or contact failure
of the connectors.
NOTE 2
Be sure to wire as before.
3) Attach the electrical parts box cover as before.
Bottom plate 1. Detachment
⑤
(fan side) 1) Remove the screw A fixing the bottom plate
(fan side).
Loosen the screw B.
2) Slide the bottom plate (fan side) to the arrow
direction and remove the bottom plate (fan side).
2. Attachment
1) Hang the bottom plate (fan side) to the screw B.
2) Attach the removed screw A to the original positions.
3) Attach the bottom plate (fan side) as before.
Procedure
– 90 –
Remarks
Earth screws
CN04
CN03
Power supply
Screw A
Bottom plate
(fan side)
Screw B
CN02
CN01