Toshiba RAV-SM2244DTP-TR Service Manual page 96

[The way of repairing high static duct 8/10HP according to
1. Contents
(1) Target production
(2) Replacing noise filter PCB
2. Required part
(1) New noise filter PCB(MCC1551)
3. Target production
3-1 Target model name .
Model name
RAV-SM2244DTP-E/-TR
RAV-SM2804DTP-E/-TR
MMD-AP0726HP-E/-TR
MMD-AP0966HP-E/-TR
3-2 Target products .
The target is a product which is installed ferrite core in motor earth lead.
4. The contents of other repairing except motor exchanging
4-1 Summary of modification points
Photo of control BOX inside before repairing
：Clamp filter
(3) Remove ferrite core which is set in earth lead of fan motor
(4) Add ferrite core to motor lead
(2) Tie band
High static duct 8HP
High static duct 10HP
High static duct 8HP
High static duct 10HP
PCB for motor
MCC1610
Replace noise filter
PCB to he new one
Noise filter PCB
MCC1551
specification change]
Type
Ferrite core attached
in earth lead of motor
Photo of control BOX inside after repairing
：Ferrite core
– 96 –
The production year
System
October, 2017 or
LC
before
LC
VRF
VRF
1. Remove the clamp filter
2. Install the ferrite core
which is set in earth lead of
fan motor