Toshiba RAV-SM2244DTP-TR Service Manual page 95

Part name
No.
⑩
Sensor TA
1. Detachment
1) Perform 1 of ① and 1 of
2) Remove the connector of the wires of TA sensor from
the control P.C. board.
3) Pinch the lock of the TA sensor holder from the outside
of the electrical parts box and push it into the inside
of the electrical parts box.
2. Attachment
1) Attach the TA sensor to the original position.
2) Attach the wires of TA sensor in the holder as before.
3) Attach the electronical parts box as before.
⑪
1. Detachment
Reactor
1) Perform 1 of ① and 1 of
2) Remove the connector of the wires of the reactor
from the fan control P.C. board.
3) Remove the screw fixing the reactor cover.
Slide the reactor cover to the arrow direction and
remove.
4) Remove the screw fixing the reactor.
Remove the reactor from the reactor cover.
2. Attachment
1) Attach the reactor to the reactor cover.
2) Attach the reactor cover as before.
3) Attach the wires of the reactor in the holder as before.
NOTE
After assembling, check if that there is no abnormal sound,
vibration, or puncture.
Check the exchange point when you have a problem.
Procedure
⑤
.
.
⑤
– 95 –
Remarks
TA sensor
CN104
Electrical parts
TA sensor holder
box
CN511
CN510
Screw
Reactor
Reactor cover
Screw
Reactor assembly