Creating an original song (pattern)
Inputting the kick drum
1.
Press [F3 (Note Number)].
Now you can select the note number of the rhythm tone you want to input.
2.
Use [VALUE] or [INC/DEC] to select "60 (C4)."
Now you can input the kick drum.
fig.Q2-03
3.
Press the velocity pads so that the pads marked by the arrows in the
diagram are lit.
fig.TRrec1
The screen display will be as follows.
You should hear the kick drum that you input.
fig.Q2-04
Next, we will input the hi-hat. The procedure is the same as in steps 1–3.
16
You can also use [CURSOR
(up/down)] to select the
note number.
You can add dynamics to
the sound by varying the
force with which you press
the velocity pad.