Roland MC-909 Quick Start Manual page 7

7.
Turn [VALUE] to set the value to "0 ms."
8.
On your CD player, play back track 24 and adjust the input level.
While you watch the on-screen level meter, use the [INPUT] knob in the VOLUME
section to adjust the volume appropriately.
9.
Stop the CD playback, and then press [F2 (Auto Trig)] to display a "✔"
mark in the on-screen check box.
With this setting, sampling will begin automatically when audio is input.
Set the Auto Trigger Level to "5."
10. Press [F3 (Trim Sw)] to display a "✔" mark in the on-screen check box.
After sampling, the start point and end point (Owner's Manual; p. 115) will
automatically be set to the region that contains sound.
fig.Q1-08
11. Play back the CD to begin sampling.
12. When you hear the click, press [F5 (Stop)] to stop sampling.
The Sample Edit screen will appear.
fig.Q1-09
Next, we will edit the sample.
Creating an original song (pattern)
On the included sample
data CD, a click is recorded
at the end point of each
phrase.
By pressing the velocity
pads located at the front
edge of the panel, you can
audition the sample you
are editing.
7