3.
Press [F4 (Truncate)].
4.
Press [F6 (Execute)].
A message will ask you whether it is OK to delete the unwanted portions of the
waveform.
5.
Press [F6 (Execute)] once again.
The unwanted portions of the sample will be deleted.
→ Truncate (Owner's Manual; p. 117)
Next, we will maximize the volume.
6.
Press [NORMALIZE/AMP].
fig.Q1-12
7.
Press [F6 (Execute)].
A message will ask whether it is OK to maximize the volume.
8.
Press [F6 (Execute)] once again.
The level of the entire sample will be boosted as much as possible without exceeding
the maximum volume.
→ Normalize (Owner's Manual; p. 121)
We are now finished editing the sample.
Samples you create will be lost when you turn off the power. In order to keep the
sample, you must save it as follows.
Creating an original song (pattern)
9