Typical Connections - Tektronix KEITHLEY 7710 Instructions For Use Manual

For this command sequence, the digital multimeter (DMM) of the 2750 is electrically isolated from the
test circuit.
Refer to the Model 2750 Reference Manual for detail on multiple channel operation.

Typical connections

The following examples show typical wiring connections for the following types of measurements:

Thermocouple

Two-wire resistance and thermistor

Four-wire resistance and RTD

DC or AC voltage
PA-847 Rev. C June 2023
Model 7710 Multiplexer Module Instructions for use with the 2750
Figure 7: Thermocouple connections
Figure 8: Two-wire resistance and thermistor connections
7