Appendix B: Rear-Panel Connections - Tektronix VX4237 User Manual

Appendix B: Rear-Panel Connections

VX4237 Digital Multimeter Module User Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The rear-panel interface consists of VXIbus connectors P1 and P2. Those pins
used by the DMM on P1 and the inner row (Row B) on P2 are configured as
defined in the VMEbus Specification, IEEE Standard 1014. Those pins used by
the DMM on the outer rows of P2 (Rows A and C) are configured as defined in
the VXIbus System Specification, Revision 1.3, July 14, 1989.
The pin assignments used by the DMM on these connectors are listed in the
tables below. For detailed information regarding the signals on the pins, refer to
the VMEbus Standard and the VXIbus Specification referenced above.
P1 Pinout (nc = no connection)
Row A
Pin Number Signal Mnemonic
1 D00
2 D01
3 D02
4 D03
5 D04
6 D05
7 D06
8 D07
9 GND
10 SYSCLK
11 GND
12 DS1*
13 DS0*
14 WRITE*
15 GND
16 DTACK*
17 GND
18 AS*
19 GND
20 IACK*
21 IACKIN*
Row B Row C
Signal Mnemonic Signal Mnemonic
nc D08
nc D09
ACFAIL* D10
nc D11
nc D12
nc D13
nc D14
nc D15
nc GND
nc nc
nc nc
nc SYSRESET*
nc nc
nc AM5
nc nc
AM0 nc
AM1 nc
nc nc
AM3 nc
GND nc
nc nc
B–1