Emergency Warning Indicator Switch; Mileage Switchover Switch; Lighting Adjustment Switch Group - BYD e2 Owner's Manual

74 3-4 Switch

Emergency warning indicator switch

Press the hazard warning lamp switch to
flash all turn signal lamps and synchronously
flash the turn signal indicator lamps on the
instrument and the indicator lamp on the
hazard warning lamp switch. The hazard
warning lamp switch is a self-resetting
switch. Press the hazard warning lamp
switch again to stop the flashing.

Mileage switchover switch

■
Press the "Mileage switchover" switch
to switch over "Total mileage" - "Mileage
I" - "Mileage II" - "Total mileage". At the
same time,
information switchover
displayed on the instrument.
■
Press and hold "Mileage I" or "Mileage
II" to reset the mileage information.

Lighting adjustment switch group

The lighting adjustment switch group is
composed of headlamp adjustment switch.
Headlamp adjustment switch
■
This switch is used to adjust the vertical
illumination angle of the headlamp. This
switch is operational after the low beam
is turned on.
the corresponding
status is
Start
Stop
ON/OFF
Front