70
3-4 Switch
Wiper switch
■
The control lever is used to control the
windshield wiper and scrubber. The
lever is controlled with five gears:
:High speed
:Low speed
:Intermittent
:Stop
:Jogging
■
To select a level, pull up or push down the control handle.
■
The wiper wipes continuously at low speed and high speed positions.
■
To run the wiper under one-time wiping mode "
from "
" to run the wiper at low speed, till the control handle is released. (Upon
release, the wiper will complete the current cycle and stop at the initial position).
■
Under the intermittent mode "
rotate the intermittent knob on the
wiper switch to prolong the wiping
interval along the narrowing of the
rainfall indicator bar.
Front windscreen wiper and
washer
■
To clean the front windscreen, pull
backward
(Towards
wheel) the wiper control handle so that
the
washer
sprays
continuously and meanwhile the wiper
runs.
■
Upon release of the control handle, the
washer stops the spraying of washing
fluid and the wiper continues to wipe
for 3 cycles and then stops.
",
the
steering
washing
fluid
", push down the control handle