BYD e2 Owner's Manual page 97

96 4 -1 Charging and discharging descriptions
Tip
●
The reserved charging function can't be used when the battery power level is low.
3. Operation instructions for stop of charging
■
End of charging:
●
End the charging in advance by the setting of charging equipment or automatically
end the charging after the power battery is fully charged.
■
Disconnection of charging coupler:
●
Disconnect the charging coupler, with reference to the household portable AC
charging.
■
Disconnection of power plug:
●
If the seven-to-seven adapter is used, it's recommended to firstly unplug the
charger and then unplug the power plug.
●
This step is omitted while using the charging box attached in the vehicle to charge
the vehicle.
●
This step is omitted when an AC charging pile is used and the charging pile is
provided with a charger.
■
Close the AC charging coupler protective flap and vehicle charging coupler cap (With
reference to household portable AC charging).
■
Collect the charge device and place it in the appropriate place;
●
If an AC charging pile/box is used, please place the charger to the designated
position of charging pile/box.
●
If the seven-to-seven adapter is used, clean up and preserve it properly.
Warning
●
It's prohibited to fall off the seven-to-seven adapter or directly pull the cables for
movement of this equipment. Handle with care during movement. After use, please
store the equipment in a cool place.
Charge post DC charge
1. Equipment description
■
Use a DC charging pile in a public place to charge the vehicle. This charging pile is
generally installed in specific charging station.