BYD e2 Owner's Manual page 113

112 4-4 Start and drive
■
Coolant level: Ensure the coolant level is correct.
■
Battery and cables: Check the connectors for corrosion and looseness and check the
battery casing for cracking.
■
Leakage: After the vehicle is parked for a while, check for leakage of coolant or other
fluid (The water drips generated from the running of A/C are a normal symptom.)
beneath the vehicle.
Start method
Normal start method:
Carry a valid intelligent key and, while
depressing the brake pedal
"Start/Stop" button
indicator lamp on the instrument turns on, it
indicates that the vehicle is ready for
driving.
Start method by Bluetooth key (If fitted):
After the Bluetooth unlocking of doors, open a door, depress the brake pedal within 10min,
and at the same time press the "Start/Stop" button. When the
instrument turns on, it indicates that the vehicle is ready for driving.
The car cannot be started:
■
In the following cases, the car will not be started:
●
When the start / stop button is pressed, if the smart key system warning indicator is
turned on, the buzzer sounds, and "No Key Detected" is displayed in the
intermediate information screen on the dashboard, the electronic smart key is not
in the car or not detected due to some interferences.
●
Even if the electronic intelligent key is within the vehicle, the vehicle probably can't
be started when the key is placed at such positions (For instance, on the floor, in
the trunk, or in a storage box).
■
When the start button is pressed, if the start function cannot be performed normally, it
may be caused by the following causes:
●
If the electronic intelligent key is not functional and the warning lamp of electronic
intelligent key flashes, the key battery power is about to be depleted. Please refer
to the operations of "In event of depleted intelligent key battery power" in "7-1 In
event of malfunctions" and replace the electronic intelligent key battery as soon as
possible.
, press the
. When the OK
Start
Stop
OK indicator lamp on the