BYD e2 Owner's Manual page 98

■
Device specifications: Please see the charge post instructions
■
Charge time: Please see the charge time tips on the dashboard
2. Charging operation instructions
Connect the car to DC charge post with the charge connector of DC charge post for DC
charge.
Instant charge method:
■
Before charging, place the power
switch to "OFF".
■
Open the charging coupler cap and the
charging coupler protective flap.
●
Push the red area shown in the
diagram to open the charging
coupler cap.
■
Connection of vehicle coupler:
●
Connect the charger of the charging pile to the vehicle charging coupler and lock
reliably.
■
Start the charge in accordance with the charge device instructions;
■
The charging connection indicator lamp
■
During charge process, the relevant charge parameters and the charge image will be
displayed on the dashboard at the same time;
●
In such case, the reserved charging can be set up on the instrument. For detailed
setup procedure, refer to reserved charging functional setting on the combination
instrument.
3. Operation instructions for stop of charging
■
End of charging:
●
Set up the charging pile to end the charging in advance or automatically end the
charging after the charging is completed.
■
Disconnection of charging coupler:
●
Push down the mechanical locking button on the DC charger and unplug the
charger.
■
At completion of DC charging by a charging pile, clean up the charging equipment and
preserve properly and place the charger to designated position of charging pile.
■
Close the DC charging coupler protective cap and vehicle charging coupler cap.
4 -1 Charging and discharging descriptions 97
on the combination instrument turns on.
4