High Mounted Braking Light; Emergency Flashers - BYD F3/F3R Owner's Manual

High-low beams: For high beams, push the
lever to position 1. For low beams, push the
lever to position 2. Pull the lever to position 3
for high beams. The indicator light (blue light)
for on the instrument panel the headlight high
beam will tell you that the high beams are on.
Flashing the high beam of headlights
(position 3)
- 64 -
Pull the lever all the way back. The flashing
high beam of headlights will turn off when you
release the lever.
You can flash the high beam headlights with
the knob turned to "off".
Turn signal lights
To signal a turn, push the left multi-function
switch up or down to position 1.
F3/F3R OWNER'S MANUAL
The key must be in the "ON" position.
The lever automatically returns after you
make a turn, but you may have to return it by
hand after you change a lane.
To signal a lane change, move the lever up or
down to the pressure point (position 2) and
hold it.
If the turn signal indicator lights (green lights)
on the instrument panel flash faster than
normal, it means that a front or rear turn
signal bulb is burned out.
High mounted braking light (optional)
While pedaling, this light will be on together
with rear brake light to warn that the vehicle is
in the braking condition so that contingency
can be prevented.

Emergency flashers