BYD e2 Owner's Manual page 93

92 4 -1 Charging and discharging descriptions
Tip
●
Unlock the vehicle and press the unlocking button of key (During charging at OFF
position) or the micro-switch on the door handle (With the presence of key).
●
Before pulling out the charger, please unlock the vehicle to unlock the electric lock of
charging coupler and unplug the charger within 30s, otherwise the electric lock of
the charging coupler will be re-locked.
●
The working mode of the electric lock can be set by multimedia. For detailed setting
procedure, please refer to the multimedia electric lock working mode setting.
●
If the charger can't be unplugged after the unlocking operation, attempt the
unlocking for multiple times. If the charger still can't be unplugged, attempt the
emergency unlocking. For the operation procedure, please refer to the emergency
unlocking of charging coupler in the electric lock control of charging coupler.
■
Disconnect the power plug.
■
Close the charging coupler protective cap and vehicle charging coupler cap.
■
Place the three-to-seven adapter into the trunk storage box.
Tip
●
When the charging coupler protective flap is under completely opened status,
please do not close the charging coupler cap.
Warning
●
It's prohibited to fall off the three-to-seven adapter or directly pull the cables for
movement of this equipment. Handle with care during movement. After use, please
store the equipment in a cool place.