Page 2
Thank you for choosing BYD automobile Providing products with high safety performance is a matter of course of BYD Auto Company Limited. This manual is prepared and made for your quick understanding of vehicle functions and for your driving with safety and comfort.
Get-on and Get-off Electronic Intelligent Key Electronic intelligent key – By pressing the left/right front door microswitch while carrying the electronic intelligent key with you, you can unlock/lock all doors. You can also operate buttons on the intelligent key. LOCK: lock the doors UNLOCK: unlock the doors OPEN: open the trunk lid START/STOP: start/stop the vehicle...
Mechanical Key Mechanical key (in the electronic intelligent key and slide-out intelligent key) – It can be used to unlock/lock the driver's door. the mechanical key in electronic intelligent key Pull the lock-up button to unlock, pull out in the direction , pull apart by applying force upward , and take out the mechanical key...
Anti-theft System If any door is opened when the vehicle is in the anti-theft mode, the system will produce audible alarm and the turn signals will flash to prevent theft of the vehicle. Setting system Power off the vehicle. Ask all passengers to get off the vehicle. Lock all the doors.
● Press the START/STOP button with the intelligent key carried in the vehicle. Notice: Do not modify the anti-theft system by means of alteration or addition because such modification may cause a failure to the system. Anti-theft indicator ■ In the anti-theft setting mode, the anti- theft indicator will illuminate for 10 s.
Opening Hands-free Access Trunk Lid by Kicking Action (If Any) When you stand in the effective detection area of the trunk lid sensor with the intelligent key carried, raise your foot comfortably and smoothly like a kicking action under the rear bumper without touching the rear bumper.
Sunroof Switch (If Any) ■ Push the button towards the rear of the vehicle to open the sunroof horizontally; ● The first mode is manual mode; in this mode, releasing this button will stop the moving sunroof; ● The second mode is automatic mode; in this mode, the sunroof will automatically open to the fully-open position;...
Page 10
Opening/closing of sunshade ■ Push the button towards the rear of the vehicle to open the sunshade: ● The first mode is manual mode; in this mode, releasing this button will stop the moving sunshade; ● The second mode is automatic mode; in this mode, the sunshade will automatically open;...
Driving Power Button Starting the vehicle Carry the correct intelligent key on board. Depress the brake pedal. Press the START/STOP button. (The gearshift lever must be placed at "P" or "N" position.) Check for light-up of the driving ready indicator (i.e. the "OK" indicator). Check the battery SOC and the driving range.
View of Combination Instrument (If Any) Full LCD combination instrument (12.3")(TANG EV) Orientation Power meter Speedometer Time Tachometer ECO/SPORT mode Vehicle travelling information Gear SOC indicator Brake feedback Odometer Outside temperature...
Page 13
Full LCD combination instrument (12.3")(TANG DM) Power meter Speedometer Time Tachometer ECO/SPORT mode Fuel gauge Gear Vehicle travelling information Brake feedback SOC indicator Outside temperature Odometer Orientation...
Page 14
LCD combination instrument (5")(TANG EV) Power meter Brake feedback ECO/SPORT mode Speedometer Time Odometer Gear Vehicle travelling information Orientation Tachometer Outside temperature SOC indicator...
Page 15
LCD combination instrument (5")(TANG DM) Power meter Speedometer ECO/SPORT mode Fuel gauge Time Tachometer Gear Odometer Orientation Vehicle travelling information Outside temperature SOC indicator Working mode of DM system...
Check if the intelligent key is carried on board or if the battery of the intelligent key is dying. ABS fault warning light Send the vehicle to a BYD authorized service provider for inspection. If the parking system fault warning light also illuminates, stop the vehicle immediately and contact a BYD authorized service provider.
Page 17
Indicator Solutions Tyre pressure monitoring system fault warning light (if any) Send the vehicle to a BYD authorized service provider for inspection if this indicator keeps lighting up or flashing. ESP fault warning light Send the vehicle to a BYD authorized service provider for inspection if this indicator keeps lighting up.
Immediately stop the vehicle and contact a BYD authorized service provider. Engine fault warning light Send the vehicle to a BYD authorized service provider for inspection Coolant over temperature/level low warning light If this warning light stays on, it indicates over temperature in coolant; in this case, immediately stop the vehicle in order to cool it down.
opened, the gearshift lever will automatically shift to P position for safety. P: parking gear position With the gearshift lever placed at this position, the motor for P position will be locked up and the switch indicator will light up. At this moment, the vehicle is shifted to P position. Never place the gearshift lever to R position when the vehicle is driving forward.
the instrument stays on after flashing and the message "EPB activated" is displayed. ■ Applying the EPB automatically when gearshift lever is in P position: ● When the vehicle speed is less than 3 km/h, the gearshift lever is in D or R position and the door is being closed, the gearshift will shift to P position and the EPB will be applied automatically.
Working modes of DM system (TANG DM) 1. EV mode button 2. MODE knob 3. HEV mode button EV mode ■ EV mode: When the EV mode button is pressed, the EV mode button indicator will light up, indicating that the vehicle is operating in the EV mode; if the indicator goes out a few seconds after lighting up, it indicates that the powertrain cannot enter the EV mode.
HEV-ECO mode ■ HEV-ECO mode: Press the HEV mode button and turn the MODE knob to "ECO" to enter the HEV-ECO mode which can improve the driving economics of the vehicle. HEV-SPORT mode ■ HEV-SPORT mode: Press the HEV mode button and turn the MODE knob to SPORT to enter the HEV-SPORT mode.
Page 23
ACC function is activated, pull the lever in this direction to increase the set speed. Decreasing set speed: With the ACC activated, pull the lever in this direction to decrease the set speed. Setting headway: Turn the self-locking knob at the end of the cruise control lever to adjust the headway among four levels.
■ With the ACC activated, depress the brake pedal to decelerate the vehicle continuously. The system will automatically enter the standby state. After releasing the brake pedal, you need to reactivate the ACC. Vehicle following to stop/start ■ The ACC system can control the vehicle to follow a vehicle ahead to stop in normal driving condition.
Canceling currently set speed Operate the switch in the direction or depress the brake pedal to turn off the cruise control system Speed adjustment Acceleration Deceleration Operate the switch in the direction; at the moment, the "SET" indicator on the combination instrument will illuminate.
All-around View Monitor System (If Any) Activation of all-around view monitor system ■ Tap "Panorama" on the home page of multimedia or press the steering wheel button to enter the all-around view monitor system interface. Optional views: ■ Tap the front, rear, right or left area of the vehicle icon on the left side to display a single view of the front, rear, right or left view of the vehicle in the...
Optional views: Front right image Reversing image ■ The two lines shown in the figure are safety lines for reversing. ■ This system only helps for parking and complete independence on it should be avoided. Remember this when using the reversing image system.
Type of sensor Front right corner sensor Front left and right middle sensors Front left corner sensor Rear right corner sensor Rear left and right middle sensors Rear left corner sensor Exterior Lights Light switch set ● The light switch set includes all-weather light button, rear fog light button, light adjustment switch, brightness adjustment switch, and headlight...
● Lift the light adjustment lever hard to the mode; the left/right turn signal and its indicator on the instrument starts flashing at the same time. After the steering wheel is centered, the light adjustment lever will return to its original position. ■...
Automatic wiping has 4 sensitivity levels. A higher level indicates a higher sensitivity. When using the automatic wiping function, you can operate the toggle to change the sensitivity based on the rain condition. If the wiper reacts too quickly, lower its sensitivity. If the wiper reacts too slowly, increase its sensitivity.
Rear A/C control panel (if any) Rear A/C TEMP + button Rear A/C LCD screen Rear A/C blower speed + button Rear A/C blower speed - button Rear A/C ON/OFF button Rear A/C temperature set button Rear A/C AUTO button Rear A/C TEMP - button Seat Adjustment of front seat...
Page 32
Lumbar support adjustment switch (if any) ● Press the front or rear portion of the switch to increase or decrease the radian. ● Press the upper or lower portion of the switch to extend the arc upward or downward. Heating and ventilation system (if any) The heating and ventilation system switches are on the front left and right door shields.
● Press the switch for the first time to make the seat ventilator work in the high speed mode and two corresponding ventilation indicators illuminate; ● After the switch returns to position, press it for the second time to make the seat ventilator work in the low speed mode, and corresponding ventilation indicator 1 will illuminate while ventilation indicator 2 will go out;...
Connect the vehicle and the charging equipment using a charging plug. Stop charging (AC charging pile or wall-mounted charging box terminal or DC charging cabinet will automatically end charging). After charging ends, unlock the vehicle and press and hold the lockup button to pull out the charging plug from the charging socket.
Page 35
Abnormal fault 1. If there are foreign matters in the charging port or terminal, it should be cleared by the high-pressure air gun; if the foreign matter cannot be cleared, need to change. 2. If the leaf spring of the charging port or bottom of the terminal is blacked, need to change.
Refueling (TANG DM) 1. Stop the vehicle with its left side being close to the fuel pump of the gas station, as the refueling hatch is designed on the left side of the vehicle. 2. Close the doors and power off the vehicle. 3.
It is recommended that you contact the BYD Auto Authorized Service Store. The system shuts down immediately even if the power switch is switched to the ready-to-drive state.
1. Please de-energize the vehicle to the "OFF" gear and disconnect the front-cabin start-up type iron battery if possible. 2. It is recommended to call the service phone of BYD Auto Authorized Service Store immediately to request assistance. 3. If conditions permit, perform a simple check on your own: check if the edge of the power battery tray is cracked and whether there is visible liquid flow.
4. Call the BYD authorized service shop for help. Towing of Vehicle ■ For towing the vehicle, contact a BYD authorized service provider. Never have your vehicle towed by another vehicle using ropes or iron chains only. Most common towing methods: ■...
Need help?
Do you have a question about the TANG DM 2019 and is the answer not in the manual?
Questions and answers