BYD e2 Owner's Manual page 135

134 4-5 Driving assistance function
Tip
●
Driving the vehicle on muddy, sandy, round hill, or icy/snowy road or under sport
mode will probably result in short-time partial or complete turn-off of tire pressure
monitoring display. Driving the vehicle under such condition for a long time will result
in the delayed warning of tire pressure warning system.
System malfunction
When the tire pressure monitoring system fails to receive signal or its received signal is
invalid, the indicator lamp
"Please check tire pressure monitoring system" is displayed, and the buzzer sounds once.
In such case, the tire pressure monitoring function on the vehicle fails. Please immediately
drive the vehicle to a BYD Auto Authorized Service Station to solve the malfunction.
Tip
●
The tire pressure monitoring display probably also fails when the ESP is
malfunctioned.
●
The system malfunction probably occurs after the installation of tire chain.
System reset
If it's necessary to reset the tire pressure monitoring system, operate as below:
■
System reset method I: (Applicable for the vehicle with reset button designed in the
multimedia)
●
Select "Vehicle information" on the multimedia and select "Reset" of "Tire
pressure". Select "OK" if you are sure to reset and otherwise select "Cancel".
■
System reset method II: (Applicable for vehicle with reset button designed on
instrument)
●
Press the "
and "
tire pressure", and operate the middle roller switch to select "OK" if you are sure to
reset and otherwise select "Cancel".
on the instrument flashes for 60s and then keeps on,
" button on the steering wheel, select "Vehicle settings"
" buttons of button, operate the middle roller switch to select "Reset
by " "