Fuse - BYD e2 Owner's Manual

■
It's better to replace four tires simultaneously. Do not only replace one tire, otherwise
the vehicle maneuverability will be significantly influenced.
■
The anti-lock brake system (ABS) is working by comparing the speeds of wheels.
During the replacement of tires, ensure to use the tires of consistent specification with
the original ones of vehicle. The tire specification and structure will influence the wheel
speed to probably result in non-harmonized system actions.
■
While replacing a wheel, ensure that the specification of new wheel is consistent with
that of original wheel. The new wheel is available in BYD Auto Authorized Service
Stations. Before replacing a wheel, it's recommended to consult with a BYD Auto
Authorized Service Station.
Tip
Please abide by the following precautions, otherwise it will result in typical control danger
and vehicle out-of-control.
●
Do not mix radial tires, slash tires or twill ply tires in one car.
●
Do not use the tires of specifications other than those recommended by the
manufacturer.

Fuse

■
All electric circuits on the vehicle are installed with a fuse to prevent short-circuit and
overload. These fuses are installed respectively in the fuse cases, namely front
compartment distribution box and instrument distribution box. The front compartment
distribution box and instrument distribution box are internally installed with a fuse label.
The relationship between fuses and electric parts can be determined by these labels.
■
Front compartment distribution box
●
The front compartment distribution
box is located on the left rear
portion of the front compartment.
To open it, push down the lock
catch as shown in the diagram.
6-3 Self-maintenance 191
6