20-inch models
The webcam pops up from the top of the computer. To remove the webcam, remove the webcam rear cover,
four screws, and disconnect the cable from the connector on the webcam.
For a list of available webcams, see
To remove the webcam:
1.
Prepare the computer for disassembly (see
2.
Remove the front bezel (see
3.
Remove the two Phillips screws (1), that secure the webcam to the computer.
4.
Disconnect the cable from the webcam (2).
5.
Remove the webcam from the computer (3).
To install a webcam module, reverse the removal procedures.
Illustrated parts catalog on page
Preparing to disassemble the computer on page
Display panel in 20-inch models on page
8.
50).
21).
Webcam
57